Recent content by jlbutler2879

I dont believe the system is producing any chlorine. In the past, I could see bubbles coming from the closest jet when chlorine was being produced. I no longer see the bubbles. I will add some liquid chlorine to build up the level and then do the overnight test.

I noticed a few weeks back that the Nature 2 fusion is not producing chlorine. I was getting the 120 and 121 codes so I went ahead and cleaned the cell, checked the water chemistry, and salt level to rule out any simple fixes and everything checked out. I then proceeded to change the salt cell...

I had the Jandy JE3000TR installed when we built the pool back in 2018. I have never needed to use the chiller function until this year. The problem is that when I go to the unit and switch it to Chiller mode, it never comes on (works great for heating). I get a message stating "Remote T-stat...

Thanks, I will raise it to those levels.

I keep it at 50.

I have only acid washed it once and that was today. There was hardly any buildup on the cell. I thought I saw that the life was 10,000 hours but that could have been a general answer and not specific to the Nature system.

I have the 1400.

Yes, I run the system 24 hours a day.

I run the cell at 80% from April through September and 30% from October through March. It is the 1400.

I do not have any of the non working cells other than the one that is currently installed. The others have been replaced under warranty but the warranty expired last month. I replaced the cable one time within the time frame. I was never told what part of the cell failed so I am not aware of...

My pool was completed in August of 2018. Since completion I have had to change the cell on the Nature 2 Fusion Soft 3 times. The most recent replacement was in March of 2021. I was checking the system this morning and I see that I am getting the 194 and 125 code again indicating that the cell...

Sure does. Thanks!!!

I have ordered the TF-100 kit. Does the FC have to be a certain level before I add any conditioner? Do any other levels need to be to a certain point before increasing the CYA?

Thanks for the info. I will get a test kit and test the levels.

I noticed some algae on the corners of the pool so I checked the water with a strip test. The strip Showed no chlorine. I went and checked the Aqua Pure board and nothing indicating any errors. It had the Flow light green and indicated that it was running at 90%. Pulled the cell and it...