Recent content by J20832

Those parts are pretty much not available other than used on Ebay (in my experience/searching). Are any of the specs of the motor available (maybe imprinted on the housing)? I might consider trying a replacement motor in my robot from a generic DC motor supplier if I continue to come up dry...

Yes, to placing the hose above the skimmer opening! That is how I always do it, less stress on the hose and less stress on the weir flap. The only issue is if you have a leak in the hose where the hose it not submerged (typically between hose and fitting on end of hose), being out of water it...

If you bought it from Costco, take it back. They have a great return policy!

That is also a model that you can purchase an add on remote for. FWIW, I had a dolphin diagnostic that worked great for 7 years. Now I am looking to replace it. The hydropool people are nice. I used to take my water there for testing before I found this site. They have been helpful in...

That was it, the blue wire to the cell. Thank you! I don't quite understand why that wouldn't result in a "check cell" error since it isn't part of the wiring from the flow switch to the panel... but anyway, I am very appreciative of your assistance and glad to be back in the business of...

How would you hook up the Polaris 360?

So after hooking up my Aquapure Ei this year, it is showing a "no flow" error. Installed it last year and it ran all season (about 5 months) with no problems and brought the control panel inside for the winter. I verified that I was getting sufficient flow by cranking up the pump and feeling...

If the prowler truly is a dolphin, then I would be thrilled. The 7 years with my dolphin were great, never even had to replace the, worked out to about $80 a season, money well spent. I just figured a different bot that I could actually fix would make more sense economically and the prowler...

Well, my 7 year old Dolphin Diagnostic might be done for. The impeller motor is shot and I am having a hard time finding a replacement part, but apparently that is a problem with the Dolphin lines, they are not user serviceable for the most part. So I am looking at replacing it with a Kreepy...

Re: Plaster/Fiberglass upper pool, coping and fiberglass pro What is your plan for the cracks in the deck? My previous owner issue is that they filled cracks with some sort of patch that looks terrible, not smooth, doesn't match, etc. My thoughts are to grind down the bad patch job, use a...

Algaenon

Theoretically, running the SWCG less should extend the life of your cell and reduce your electricity consumption.

If you do get one (which I also recommend), make sure you keep an eye on your chlorine level and SWCG setting as you will find you are using a lot less chlorine!

Just order the tool. I am sure you could possible get them off with a flathead screwdriver, but there is A LOT of tension and I can't think of any truly safe way to do it without the tool. The tool is not anything highly sophisticated, you could probably make one easily with some steel pipe...

Yes, in my experience, the DE will cause the filter to need a backwash much sooner which makes complete sense since it is catching many more particles since the smaller particles are no longer just passing through. I mostly just use the DE about a week after I open the pool after most of the...