Recent content by flyboytfp

Holy c**. We did not know that. Thank you very much for that. This changes many things. Like forget the pump/motor thing. Jim

Interesting. I will check this out and see if possible. Thank you. Jim Happy 4th.

Correct. Floor returns are nozzles that pop up and rotate, sort of sweep effect to floor. About 3" wide/1" height. Wall nozzles come from 1.5" pipe with a 1" fitting attached to end. Floor and wall nozzles are controlled by Paramount water valve which controls flow to each nozzle in sequence...

No in floor cleaner. Sorry

What do you folks think about this pump for my needs? WFDS -4

Hello Bama, Its 240. Jim Also have 55' of pipe from pump pad to valve that controls floor and wall outlets. Two return lines of 1X1.5" and one 2". Two suction lines of 2" pipe. One from skimmer(55' to pump pad), one from main drain(35' to pump pad). Hope this helps.

Added Image of Motor Label.[attachment=0:17ra69rg]Pump_Label.JPG[/attachment:17ra69rg]

Home built 1997, we purchased in 2000, Not sure of what pump/motor I have as motor has been changed by pap several times over the years, as recent as May this year. It seems that motor exchanged with same as before 1.5HP SF 1.1 with no consideration for efficiency, needs or electrical use. Have...

:-D All comments appreciated. Thanks Jim

Thanks everybody. Looking at sand filters, these two: Hayward S244T Pro Top Mount 24" with 1.5" Vari-Flo Valve and Triton II TR 49 GPM 2.46 SF and I think 2" Hi Flow Valve Side Mount. Please comment on these two items for me to consider. Any comments on using Zeosand? Do I have too much...

Thanks every one. Helpful input. Any experience with Jandy CS200? Jim

Today noticed leak on backside of PXC125 filter about 1 inch below intake port. Stream is the size of small needle. Was going to replace with same however they say that this model has been discontinued. So maybe now is good time to try something better. No problems, however. How say you Sand...

Have checked and rechecked all systems appear to be normal. So looks good. Latest numbers follow. Thanks for all help. FC 8.0 CC 0.5 TC 8.5 TA 75 CH 275 CYA 80 PH 7.5 This was with 60% setting have reduced to 40%