Recent content by flagirl

I did all the things he recommended as far as checking for suction side leaks and lubing the plugs. That's why I figured it was time to look into upgrading the equipment. Maybe If I shop around, I can find someone to pay who will fix my problem and be slightly less condescending to me!

Thanks but I've done all that before so I guess it's just time to try pool companies and hope I get a knowledgeable repair person.

OK, thanks! I'll prepare myself for a big bill! It will be worth it, though, if it makes it easier to keep the pool clean! :D

It is a Baracuda G2. I picked it out because it is supposed to work with low-powered pumps. I have also used other brands with similar results. Believe me, I do close off the main drain and the other skimmer line to get it to run at all! The only thing that I can think to do is to replace the...

It is a 20+ year old Hayward Super II. It does seem like it lost power after a couple of hurricanes in the mid-90s. The impeller has been changed and it didn't seem to result in much improvement. I am willing to buy a new pump also if that is necessary. Would a 20+ year old sand filter need...

Split by moderator from HERE. Please start your own thread for your own questions. Thanks, jblizzle I looking for similar information. I have a 3/4 HP motor that works fine for circulation, but will NOT run a pool cleaner. I even bought the lowest flow pool cleaner I could find reviewed, opened...

Yes, come to think of it, a repair person did have to reconfigure the pipes a bit because the pool builder installed the pump so close to the house that it was nearly impossible to work on the motor. That bend in the top pipe going from the pump to the sand filter didn't used to be like that. It...

OK, I looked at the motor label and the SF is 1.0. I tried vacuuming and blasting out the lines some more today and didn't really notice anything significant.

Super II does ring a bell. The labels are all very faded because the pump is about 20 years old. No, it hasn't been taken apart recently. I am concerned about a clogged suction line because it seemed like performance dropped after a hurricane put a lot of debris in the pool. The pump has been...

I've got to admit that I didn't even know pumps had a drain plug either until I read about them on here recently. You can search pump diagrams online. It looks like they are located on the lower front part of the pump. Very small things! I will try lubing it and replacing the O-ring.

Sorry, no advice, just sympathy! I'm having a similar problem. I posted about it on "Pumping Station" because I was questioning whether my pump motor was strong enough to run the cleaner. Mine doesn't stall (yet) unless the deflector gets caught under something, but it is all I can do to get...

Here are a couple of photos. The pump is old so I couldn't read the model number on the tag. The impeller was replaced a few years ago. Thanks for looking! Any ideas? Normal filter pressure is about 10 psi. It used to be about 13 many years ago. It drops to about 5 with the cleaner attached.

OK, I might have to wait until the weekend because I'm at work now and it has been raining every evening lately, but I'll look for model numbers and get some pics!

I was hoping someone could give me tips for running my pool cleaner effectively. I've been doing searches on the web and this forum to try to do some troubleshooting on my own. After bad experiences with a Hayward Navigator and a secondhand Polaris 360, I got tired of years of manual vacuuming...

Welcome to my world! It's rained buckets almost every day here since the beginning of the month! :(