Recent content by danvet

Awesome - thank you!

Not sure - sorry.

I've read that too about the filter indicator. But like I say - if it's actually signaling low water flow then that might be a good thing, even if the filter isn't really full.

Too soon to tell - I've literally only run it twice. Haven't seen it "mount" my steps or shelf yet - but then I've not been watching it that closely either. One thing I noted was that on the first run the "filter full" indicator came on but the filter basket was only about 20% full. I think...

I can't answer the question about the shelf - but I don't think the Active 40 makes sense for what you get vs the Active 30. Having been thoroughly confused by the Dolphin lineup (I'm certain that's what Maytronics intended), I finally found this great YouTube video which breaks down the...

I just bought a fancy new Dolphin robot and I heard there was a rebate on it. I spoke with our favorite Dolphin person at our favorite Dolphin store and she told me to look online. I've found details of two current promotions on Dolphin robots: Dolphin Days of Summer (April 1 to July 31, 2023)...

Also I was looking again at your photos and I just noticed that the screen on the pump is not showing the pump address. This is what mine looks like: So my guess would be a comms error. I think things I'd check would be... 1. Check that the Pump Address is set on the pump (Menu, Settings...

With everything connected did you / could you try pushing: - the start stop bottom on the pump - program 1 button on the pump - program 1 "run now" in the app (if available) So it seems that the problem must lie in: - app settings - pump settings - ic40 settings (I'm not familiar) Have you...

Jim, I would have thought that too... But with no documentation it's hard to be sure. And I do think you CAN set programs through the app - but only for RPM. Right now if I set an RPM in the app, whatever I choose (the lowest being 450) then the pump program will change to 140 GPM (which I...

Couple of thoughts: First, I believe that the enabled toggle in the app just tells you whether the pump is running - NOT whether control is enabled. So if there is no program that should be running (you're outside of your scheduled hours) then the app will say disabled. EDIT: Ok I see that the...

At least on mine the start/stop button on the pump still works even when the IntelliConnect is connected and the screen is not active. As do the program buttons 1-4. If you disconnect the communication wire to regain control, does program 1 in the pump reflect what you have in the app?

What programs do you have set in the pump? What happens if you hit the start button on the pump itself? Also - looks like you're controlling two separate devices. What's the second device? Is it on a different # address?

I'm intrigued... If you take that argument to its logical conclusion then why bother at all with the pump and all associated plumbing? Are you saying that one could just use a pole and net for anything floating on the surface, a robot for anything on the bottom and chemicals to get anything in...

Ok well after a lot of trial and error (and intermittent wailing and gnashing of teeth), I THINK I've got this thing figured out - or at least my understanding now is substantially different to what it was a few hours ago. For any other members having difficulty (panic_button?) here's what I've...