Recent content by Budman

Thanks. I was just surprised at the size of the entire filter. Maybe I'm just used to seeing the 60 sq ft filter grid style filters. The grids alone were 30" tall and 7 of them. Why didn't the pool builder put in a backwash valve? At least it would save some time instead of taking the entire...

Just an observation, a friend has been taking care of his pool for about a year and cleaned the filter a couple months ago. About 15k gallon salt water gunite pool. He asked me to look as to why the water wasn't flowing as good and he has the VS pump and it's set on speed 3. Turns out the...

Yep, it's just a press fit. Took the armature out to replace the bearings and the fan slid right off the splined shaft

My opinion? From a homeowner, you can have my salt pool. I've been thinking of going back to chlorine floaters and save me the grief and money. I've already replaced one IC40 and now another is flashing "low life". Our water conditions isn't helping. The calcium deposits that they leave behind...

I have a broken fan blade and also a spare motor with the fan. How do you remove the fan? Looks like a press fit? I can't believe the price. http://www.tcpoolequipment.com/pool-equ ... p10073.htm

I'll have to pay closer attention to things, hopefully before anything goes wrong. This was one of those things that you assume is OK since you look and all the lights are green so you're good to go. The light is red for a split second when it comes on and then changed to green, but no water was...

Yes, that's what it is. The first metal tab is very thin and bends easily. They were both touching so a slight bend moved them apart and working correctly now. Sure was a much less expensive repair than buying a new generator.

Where'd everyone go? Was great talking with everyone and glad to get things worked out. For now the cables are switched until I talk things over with pool builder. Found the flow switch tab was too close together. I just made it the same distance apart as the good generator and all is good...

I switched the cords coming out of the cell itself, nothing involving the wiring or boxes. I think I need to have a discussion again with the pool builder. I can't keep paying for his mistakes everytime there's a problem.

You guys are right again. The flow light goes from red to green as soon as it comes on before water is flowing. The pump didn't even turn on yet.

So it's a wiring problem and not a programming problem? Fortunately the electric cords are long enough I can swap them around. Since I always saw them both on, I never thought it would cause a problem. Thank you all for helping me out. It was everyone's ideas that helped me sort out the...

Uh oh, just sinking in from all the replies. While I was looking for the intake leak on the pool side, I noticed the SWG wasn't on when the pump was on. When both pumps, spa and pool, are on everyday, both SWGs are on. I turn the spa pump on and the SWG comes on to the pool side. I believe the...

Thanks One piece blew over the wall about 20' away.

No, nothing like that. Some legal matters between homeowners and golf course and rv park might lead to some jackwagon retaliating in a childish way. Equipment is fairly inaccessible unless someone wants to jump a 6' wall.

I won't get into that but that was the first thing that came to everyone's mind. Some issues in the developement. But we had a house full of people. gates were locked. I wouldn't rule anything out. If none of the other issues I addressed hadn't happened, vandalism would be at the top of the list.