Recent content by BrentATL

  1. BrentATL

    Oil film on top of water....new as of this morning.

    My HP did have a freon leak and due to its age and condition, I just pulled it out and will replace it someday....maybe. Only used it twice in the past 18 months so averaging my cost per use for a new unit is very high. lol
  2. BrentATL

    Oil film on top of water....new as of this morning.

    Update: I removed the heat pump yesterday and today the water is 98% oil free. I didn't see any obvious issues with the heat pump as I tore it completely apart, but it's the only thing that's different today.
  3. BrentATL

    Oil film on top of water....new as of this morning.

    I am going to cut the heat pump out this evening and re-plumb it. I can't think of anything else.
  4. BrentATL

    Oil film on top of water....new as of this morning.

    No lawn/tree treatments (ever). No kids and it's only me that swims. I keep my pool deck spotless (to the point of obsession). I'm in Florida and pool is also caged.
  5. BrentATL

    Oil film on top of water....new as of this morning.

    I have been maintaining my pool for a year now (thanks to TFP and the FT-100 kit) and all has gone darn near perfect. I swam last night and nothing was out of the ordinary, but when I went to check levels this morning, my pool is covered with an oily film. Please see attached photo. I have a...
  6. IMG-2337.JPG

    IMG-2337.JPG

  7. IMG-2334.JPG

    IMG-2334.JPG

  8. BrentATL

    Chlorine went from 2.5 to 22.5 after adding 28 oz. of bleach....Why?

    My cell is the Hayward TCELL940 and 10% bleach is correct. Looks like I forgot to account for the Cell. 😬
  9. BrentATL

    Chlorine went from 2.5 to 22.5 after adding 28 oz. of bleach....Why?

    Yes, the SWG was operating at 2600. After adding the 20 lbs, it switched to "High Salt" and shut off. 2 Hours later it was back on and my reading was 3200 (via test kit and SWG display). I have turned the SWG off and will continue to monitor the FC levels. Thanks for your help!
  10. BrentATL

    Chlorine went from 2.5 to 22.5 after adding 28 oz. of bleach....Why?

    This is my first week of doing my own pool maintenance and I'm not sure where I went wrong. I use the TF-100 kit. 10,800 IGP SWG set to 70%, pump has been running for 24 hours since adding items listed below. Prior to adding what was recommended by the Pool Math App, this is what my number...
  11. BrentATL

    CYA is 0 - Pool service says it's okay and left it at that.

    If I am reading some of the forum threads correctly, I can use Clorox liquid (Clorox Performance Bleach 121 oz. bottle) to increase my chlorine level.....correct? If something else is recommended, please let me know.
  12. BrentATL

    CYA is 0 - Pool service says it's okay and left it at that.

    Yes, I does feel a bit on the harsh side.
  13. BrentATL

    CYA is 0 - Pool service says it's okay and left it at that.

    Thanks for that clarification. Yes, I was thinking the SWG would raise it.
  14. BrentATL

    CYA is 0 - Pool service says it's okay and left it at that.

    I didn't think it was a good idea, but thought I would double check. Thanks!
  15. BrentATL

    CYA is 0 - Pool service says it's okay and left it at that.

    Good point. I'm taking it over and appreciate everyone's help here! Another question....I watched the girl rinse out the test containers in the pool. Is that okay?