Recent content by AdventurerNori

  1. A

    Pebble covered my bubbler

    Thank you. Should I have the tile grout repaired? This is supposed to be brand new grout so Im just concerned that its cracking already. I also zoomed in the photo of the plaster crack
  2. IMG_2975.jpeg

    IMG_2975.jpeg

  3. A

    Pebble covered my bubbler

    Ok thank you for the great info, I appreciate it. We finished the pool plaster, they fixed the bubbler and did a fairly good job. Now we noticed two more things: cracks in the plaster finish and cracks along the tile grout line. There are about 8 plaster cracks along the edge of the baja shelf...
  4. IMG_2972.jpeg

    IMG_2972.jpeg

  5. IMG_2971.jpeg

    IMG_2971.jpeg

  6. IMG_2935.jpeg

    IMG_2935.jpeg

  7. A

    Pebble covered my bubbler

    Yes thank you that is what they are doing now, but I guess my question would be: is there harm in doing this so soon after the plaster has been applied? They drained it down about half way and want us to wait 6 hours to fill to allow dry time. Is this going to affect the finish negatively?
  8. A

    Pebble covered my bubbler

    PB says pebble guys want to drain the pool to the bubbler (2nd step height) on Friday and chip out around the bubbler, patch around it, acid wash, then refill the pool. This would mean that the pool was filled for only 48-72 hrs before having the water level lowered below tile line.
  9. A

    Pebble covered my bubbler

    Hello, If you have read my last thread, the PB, tile company, and mason came through for me and redid some of the tile on my water feature so that it is acceptable now (not nearly as good as I had expected, but acceptable none the less...) Anyway, we moved on to shooting interior and the pebble...
  10. A

    Water feature tile not even, lippage

    Thank you. Is this common knowledge such that my Mason and/or PB should have known this?
  11. A

    Water feature tile not even, lippage

    I see, okay i appreciate your input!
  12. A

    Water feature tile not even, lippage

    Im not sure what you are getting at but I’ll play. The tile was expected to be flat and square per NPT’s display and online photos. Its not like there was a disclaimer stating “pool tile may not be as flat and straight as shown”. So nobody (me, PB, or Mason) expected the tile to be wonky. As...
  13. A

    Water feature tile not even, lippage

    Hello, This is for a remodel with a brand new water feature wall. PB had mason build wall using cement block and same mason put on all the tile. Tile is from NPT large format 12x24” Slate color. As you can see from the pictures, there are dips and “lippage” from most of the tiles creating a very...
  14. IMG_2722.jpeg

    IMG_2722.jpeg

  15. IMG_2742.jpeg

    IMG_2742.jpeg