You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
Thanks!
My water chemistry is actually fine. Having a salt cell with an prologic automation system and a robotic pool cleaner i am sure...
-
You can see my pool in my profile pic.
I have two 2" outlets that come straight from a 2hp pump that basically pushes the top layer...
-
Good afternoon, did the new motor solve your problem? I’m having the exact same problem with my robot. I troubleshot and it is...
-
Sorry for the late response. My issue ended up being both the motor assembly and the line.
Luckily it was still under warranty and got...
-
If I ever get a new unit like this the first thing I’m doing is opening it up and putting in that water sensor.
-
After some more testing, i found one motor went bad as well as the motor circuit board.
This all started from a small leak that sprung...
-
Ebay
Definitely not new. New to me. And better then my obviously burnt circuit board.
It seems to have made some progress, now lift...
-
Soldering on a new capacitor did not fix it. Looks like possibly more was burnt besides the capacitor. The original circuit board would...
-
Eventually I ended up taking off the motor housing. And it was not completely dry inside.
The circuit board had a fried capacitor. Most...
-
Loading…
-
Loading…
-
Loading…