pjt
Report

pjt

Gold Supporter Silver Supporter
Well-known member From The Woodlands, TX
Messages
1,507
Media
177
Featured content
0
Reaction score
892
Points
1
Joined
Last seen
Viewing feeds
Follow
Start conversation

Latest activity Postings Media About

    • pjt
      pjt replied to the thread Target ph or CYA first.
      Contaminates consume FC. Keep topping up the FC to SLAM level. The more often you top up, the shorter the SLAM. Do it when your...
    • pjt
      pjt replied to the thread Ye Olde TA vs pH Debate.
      It looks like your block is bad/faded. How have you been storing it? Was it exposed to sunlight for a long time?
    • pjt
      pjt reacted to ajw22's post in the thread Ye Olde TA vs pH Debate with Like Like.
      Look at the difference in color blcoks between your comparator block... and mine...
    • pjt
      pjt replied to the thread Deep end is cloudy.
      How are you testing? Fill out your signature when you have a minute.
    • pjt
      pjt reacted to stretchphoto's post in the thread Ye Olde TA vs pH Debate with Like Like.
      turned off swg when I saw the fc Yes to your q re TA
    • pjt
      pjt replied to the thread My pH rises from 7.5 to 8.0 in 2-3 days after every treatment with dry acid.
      Your #1 priority should be buying a recommended test kit. It's the foundation for proper pool care and will save you much time, effort...
    • pjt
      pjt replied to the thread Ye Olde TA vs pH Debate.
      Temporarily turn off your SWCG to allow your FC to drift down below 10 and retest your pH. Use a uniform lit background for the pH...
    • pjt
      pjt replied to the thread Target ph or CYA first.
      Your first post said 200+, which is causing confusion. Run the TA test on your tap water. Stop using pH down. Use muriatic acid to...
    • pjt
      pjt reacted to ajw22's post in the thread Flow Vis H2flow meter/check valve with Like Like.
      You are installing a Heat Pump which is the most restrictive type of heater. All of the other things you are worrying about for...
    • pjt
      pjt reacted to Jimrahbe's post in the thread pH TA Battle with Like Like.
      P, We do not use the "CYA adjusted" TA. I run my TA between 50 and 60 and it works fine for me. I have three saltwater pool that I've...
    • pjt
      pjt reacted to ajw22's post in the thread pH TA Battle with Like Like.
      Welcome to TFP. TFP uses uncorrected TA. From TA - Further Reading Pool store TA tests often report lower then what you get when...
    • pjt
      pjt replied to the thread Plumbing updates input requested..
      If you're replumbing a few things, now would be a good opportunity to install an external heater bypass. Since you already have a check...
    • pjt
      pjt reacted to Jimrahbe's post in the thread Pool Drain time again to lower CYA, Yikes! with Like Like.
      Les, There is just no such thing as SWCG corrosion.. I have had three saltwater pools for well over 10 years and there is just zero...
    • pjt
      pjt reacted to dfwnoob's post in the thread Pool Drain time again to lower CYA, Yikes! with Like Like.
      SWCG-level salinity does not corrode pool parts. A chlorine pool is a salt pool. You will be stuck in a loop of doing this over and...
    • pjt
      pjt reacted to Dirk's post in the thread Pool Drain time again to lower CYA, Yikes! with Like Like.
      If you measured the salt in your pool, you'd find plenty. You probably already have a salt water pool! All chlorine-sanitized pools are...
    Show older items
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back