mas985
Report

mas985

TFP Expert LifeTime Supporter
Well-known member From Pleasanton, CA
Messages
16,950
Media
273
Featured content
0
Reaction score
1,399
Points
0
Joined
Follow
Start conversation

Latest activity Postings Media About

    • mas985
      mas985 replied to the thread Aqualink re-prime on Solar?.
      Ok, that is fine and should not be part of the problem. Not that I can see. It is odd they do not provide a mechanism to up the speed...
    • mas985
      mas985 replied to the thread Aqualink re-prime on Solar?.
      I did miss the responses, thanks. VRV location should never be lower on the return pipe. Pressure is much lower there to keep it closed...
    • mas985
      mas985 reacted to Dirk's post in the thread Aqualink re-prime on Solar? with Like Like.
      You might have missed his answers: The top of the array is ~12' above the surface of the pool the VRV is about half that height on the...
    • mas985
      mas985 replied to the thread How to Choose Equipment for New Build.
      The Master Temp 400 has an internal bypass: This is much better than heaters without a bypass such as most heat pumps but not as good...
      • 1714575825618.png
    • mas985
      mas985 added the media item 1714575825618.png to New Pool Builds.
      1714575825618.png
    • mas985
      mas985 replied to the thread AQL-PS-8 Remote Emulator App.
      One more thought. Is the clock on your P4 constantly running fast or slow? How many minutes per day/week? There have been reports of...
    • mas985
      mas985 replied to the thread Aqualink re-prime on Solar?.
      I have the Hayward AquaLogic controller. How high are the panels installed? Where is the VRV installed? What is the filter pressure...
    • mas985
      mas985 replied to the thread AQL-PS-8 Remote Emulator App.
      You have a standard EW11 correct? Can you confirm the baud rate is correct? 19200
    • mas985
      mas985 replied to the thread AQL-PS-8 Remote Emulator App.
      The script uses the keep alive for timing purposes and I did some timing measurements from my unit and they come in at 100 ms intervals...
    • mas985
      mas985 replied to the thread AQL-PS-8 Remote Emulator App.
      Just curious, does the IOS app work too?
    • mas985
      mas985 reacted to elizb's post in the thread AQL-PS-8 Remote Emulator App with Like Like.
      I replaced the script with a modified one.. changed these variables. TIME _GAP = 6 KA_NEXT_TIME = SYSTIME + 60 - TIME_GAP DT= DT+60 and...
    • mas985
      mas985 replied to the thread AQL-PS-8 Remote Emulator App.
      Did you remove the script?
    • mas985
      mas985 replied to the thread AQL-PS-8 Remote Emulator App.
      This is the code for the filter button. See if you can send it: 100200028000800001141003 Also, with the app, see if you can try...
    • mas985
      mas985 replied to the thread AQL-PS-8 Remote Emulator App.
      It should be sending the same codes as what the local controller does. The only thing I can think of is the timing is different with...
    • mas985
      mas985 reacted to elizb's post in the thread AQL-PS-8 Remote Emulator App with Like Like.
      Troubleshooting success again! I checked the P4 mode box in settings, and am getting the display text coming over. Turning on the...
    Show older items
  • Loading…
  • Loading…
  • Loading…
Top Bottom
Back