Hello Everyone -
I have installed a new TotalControl SWG system. The system utilizes pH, ORP, and flow sensors to monitor and maintain pH (utilizing a Stenner Acid Pump) and Chlorine utilizing a RC-52 cell. The system in default total control mode utilizes ORP to monitor and maintain FC levels. I have been advised here on TFP not to utilize ORP mode since it is a very difficult way to actually manage FC and to utilize Purifier mode instead.
So when I disable ORP mode on the AutoPilot, it gives me a new screen showing purifier output in % and the instructions say that I can adjust the output at that screen. Unfortunately, when I try to increase the purifier output it will only allow me to increase it to 1%, that is it, no higher.
Only when I shut down the total control part of the system (which also shuts down the pH control) can I adjust the purifier %, but then I have to manually control the pH as well as the purifier.
I was hoping someone here had some insight on how to get the TotalControl system to operate in Purifier mode.
Thanks
I have installed a new TotalControl SWG system. The system utilizes pH, ORP, and flow sensors to monitor and maintain pH (utilizing a Stenner Acid Pump) and Chlorine utilizing a RC-52 cell. The system in default total control mode utilizes ORP to monitor and maintain FC levels. I have been advised here on TFP not to utilize ORP mode since it is a very difficult way to actually manage FC and to utilize Purifier mode instead.
So when I disable ORP mode on the AutoPilot, it gives me a new screen showing purifier output in % and the instructions say that I can adjust the output at that screen. Unfortunately, when I try to increase the purifier output it will only allow me to increase it to 1%, that is it, no higher.
Only when I shut down the total control part of the system (which also shuts down the pH control) can I adjust the purifier %, but then I have to manually control the pH as well as the purifier.
I was hoping someone here had some insight on how to get the TotalControl system to operate in Purifier mode.
Thanks