Hi all...
Pool school closing procedure says the following:
Pool School - Closing an In Ground Pool
Drain plugs - Remove the drain plugs on the pump, filter, and heater. I also remove the SWG cell assembly and various other parts of the Total Control system (sensors, acid tank, etc). The drain plugs get stored in the pump strainer basket, the Total Control parts go in the basement. Any drain plug hole exposed to the weather gets a layer of non-hardening joint compound on the threads to protect from rust.
Can someone provide an example of what that might be, different types of joint compound...
Thanks in advance...
Pool school closing procedure says the following:
Pool School - Closing an In Ground Pool
Drain plugs - Remove the drain plugs on the pump, filter, and heater. I also remove the SWG cell assembly and various other parts of the Total Control system (sensors, acid tank, etc). The drain plugs get stored in the pump strainer basket, the Total Control parts go in the basement. Any drain plug hole exposed to the weather gets a layer of non-hardening joint compound on the threads to protect from rust.
Can someone provide an example of what that might be, different types of joint compound...
Thanks in advance...