I have a Raypak 8450 HP. It works great but it is relatively restrictive. It seems like even though it has a titanium heat exchanger and does not call for a bypass, that a bypass is still a good thing to have. According to the manual it looks like I’m probably getting 9-10 on the pressure drop and I’m not going to be using the HP the vast majority of the time. So I want to install a bypass. I attached what I believe to be the best way, but I would like feedback please to make sure I’m thinking correctly. I realize I’m going to have to change my 45s from the filter to the HP to 90s to give room for the 3 way. Then run a T at an angle to line up with the 90 that will be on the bypass line. Question 2 is, with this could you partially bypass the HP? Let’s say I wanted to heat and run the pump on high to mix chemicals and keep the flow rate to the HP optimal. TIA