Hey guys!
I am new to the forum and this is my first post! I am a somewhat new tech for a resort. I can do standard maintenance; repair motors, re-plump most things, repair valves etc. I am having a problem with a multiport leaking through backwash/waste valve. I have repaired gasket, new multiport, and kept filter pressure where needed. I have made sure new spider gasket is in place, lubed, and multiport seated on gasket correctly. This is the set up I am working with. I have done many of these repairs all around the resort and never ran into any issues. Any suggestions is very appreciated!
I am new to the forum and this is my first post! I am a somewhat new tech for a resort. I can do standard maintenance; repair motors, re-plump most things, repair valves etc. I am having a problem with a multiport leaking through backwash/waste valve. I have repaired gasket, new multiport, and kept filter pressure where needed. I have made sure new spider gasket is in place, lubed, and multiport seated on gasket correctly. This is the set up I am working with. I have done many of these repairs all around the resort and never ran into any issues. Any suggestions is very appreciated!