Hello, problem with my Aqua Logic pool, uses AQL-PS-8 controller. My Aux 3 relay runs an Edge Pool pump. Recent problem now is when the Aux 3 runs (either via timed schedule, or when run Manually), the system shuts it down and goes into Service Mode. I can successfully run Aux 3 pump while in Service Mode, but as soon as I turn off Service, and try to run Aux 3 manually, goes right back into Service Mode.
This seems to be only happening with Aux 3 Edge Pool Pump, as I have Aux 5 running a Waterfall pump, and this Aux 5 runs fine via timed schedule, as well as running manually.
Any thoughts as to why Aux 3 Edge Pool Pump triggers the system to go into Service Mode? My system is around the 2006 timeframe, but all was running fine up until about late March 2024. thanks
This seems to be only happening with Aux 3 Edge Pool Pump, as I have Aux 5 running a Waterfall pump, and this Aux 5 runs fine via timed schedule, as well as running manually.
Any thoughts as to why Aux 3 Edge Pool Pump triggers the system to go into Service Mode? My system is around the 2006 timeframe, but all was running fine up until about late March 2024. thanks