Difference between revisions of "Sand Filter Use and Care" - Further Reading

 
Line 14: Line 14:
 
*Stick a garden hose into the sand and turn on the water. The sand should loosen up and all the dirt and gunk should float and overflow out of the filter.  
 
*Stick a garden hose into the sand and turn on the water. The sand should loosen up and all the dirt and gunk should float and overflow out of the filter.  
 
*You might need to stir up the sand a bit. Keep this up until the water overflowing out of the filter is clean.  
 
*You might need to stir up the sand a bit. Keep this up until the water overflowing out of the filter is clean.  
*If any sand is clumped together CAREFULLY break it up with something like a broom handle but BE VERY CAREFUL NOT TO DAMAGE THE LATERALS. You will be surprised at how much stuff this gets out of your filter than backwashing doesn't and I feel this 'deep cleaning' should be done yearly.  
+
*If any sand is clumped together CAREFULLY break it up with something like a broom handle but BE VERY CAREFUL NOT TO DAMAGE THE LATERALS. You will be surprised at how much stuff this gets out of your filter that backwashing doesn't and I feel this 'deep cleaning' should be done yearly.  
 
*This should take care of the channeling but if the sand has a lot of calcium deposits you might want to follow this up with an acidic sand filter cleaner from the pool store.
 
*This should take care of the channeling but if the sand has a lot of calcium deposits you might want to follow this up with an acidic sand filter cleaner from the pool store.
 
*GENTLY tap on the sand tank with a rubber mallot and watch the pressure gauge climb about 2 psi.
 
*GENTLY tap on the sand tank with a rubber mallot and watch the pressure gauge climb about 2 psi.
  
 
.
 
.

Latest revision as of 23:42, 10 November 2019

Sand Filter

Sand filters capture particles down to 20-40 microns.

A slightly dirty sand filter works better at capturing and filtering stuff. Only backwash when your filter pressure raises 25% over your baseline clean pressure.

Adding a small amount of DE can improve sand filter filtering.

How to Deep Clean a Sand Filter?

Deep Cleaning a Sand Filter has instructions with pics of the deep cleaning process.

Repairs

My sand is "channeled" how to fix it?

  • Open up the filter so the sand bed is exposed.[1]
  • Stick a garden hose into the sand and turn on the water. The sand should loosen up and all the dirt and gunk should float and overflow out of the filter.
  • You might need to stir up the sand a bit. Keep this up until the water overflowing out of the filter is clean.
  • If any sand is clumped together CAREFULLY break it up with something like a broom handle but BE VERY CAREFUL NOT TO DAMAGE THE LATERALS. You will be surprised at how much stuff this gets out of your filter that backwashing doesn't and I feel this 'deep cleaning' should be done yearly.
  • This should take care of the channeling but if the sand has a lot of calcium deposits you might want to follow this up with an acidic sand filter cleaner from the pool store.
  • GENTLY tap on the sand tank with a rubber mallot and watch the pressure gauge climb about 2 psi.

.