Difference between revisions of "Hayward Super II Pump Repair" - Further Reading

Toggle sidebar Toggle sidebar
Page Discussion
View source History
m (Added Stub Tag)
m
Line 1: Line 1:
−
{{stub|date=2019-11-29}}==Checking the Impeller for Debris==
+
{{stub|date=2019-11-29}}
 +
==Checking the Impeller for Debris==
 
To open the pump shut off power at the breaker and remove the six bolts and pull back the power end.<ref>https://www.troublefreepool.com/threads/grinding-noise-around-pump-and-multiport-valve.193183/post-1702724</ref>
 
To open the pump shut off power at the breaker and remove the six bolts and pull back the power end.<ref>https://www.troublefreepool.com/threads/grinding-noise-around-pump-and-multiport-valve.193183/post-1702724</ref>
  

Revision as of 19:22, 29 November 2019

This article is currently incomplete. While this article is off to a good start, it still has room for major improvement. Until the article reaches its full potential, it will be hidden from search results.

Checking the Impeller for Debris

To open the pump shut off power at the breaker and remove the six bolts and pull back the power end.[1]

Don't remove the back cover like he does in the video at https: //youtu .be/Hy1meV5Y4iQ.

Remove the diffuser and check the wear ring and impeller.

  1. ↑ https://www.troublefreepool.com/threads/grinding-noise-around-pump-and-multiport-valve.193183/post-1702724
Retrieved from "https://www.troublefreepool.com/wiki/index.php?title=Hayward_Super_II_Pump_Repair&oldid=2456"
Top Bottom
Back