Wrinkles after Opening

SPKNout4CHRIST

Well-known member
Mar 4, 2011
223
Goldsboro, NC
#1
After opening this year and getting the pool clean I found some wrinkles on the floor and some on the wall. I know the liner is at least 8 years old, so I am not sure how to proceed.

They are not very noticeable when vacuumed around, but don't want any long term problems if I can avoid now. Also want the robot to be okay around them. Still waiting to clear the deep end to be able to see there as well.

What is my best course of action?

These were my opening numbers. FC is maintained around 16 for SLAM. pH was reduced prior to starting SLAM.

FC = 0
CC = 0
pH = 8.2+ (
TA = 70
CH = 25
CYA = 0



 

tlevy

Well-known member
Jun 3, 2015
357
Ottawa/Ontario
#2
Nothing to offer, sad to say - we had the same problem this year. Following discussion though...


18000 IG, SWG, 1/2 HP Tri Star + Solar PV direct DC Lorentz pump, Sand filtrt