Trouble removing pool light fixture

mackics

New member
Jun 6, 2021
1
Jacksonville, FL
I'm having a difficulty in removing my pool light fixture. I unscrewed the single screw that holds the fixture (see attached image), but the fixture does not budge. I tried lightly prying it with a screwdriver, but no success. What am I missing? Is there a trick to removing these? All of the YouTube videos make this look like a simple job, so I must be doing something wrong.
Any help is much appreciated.
Pool-light-2.2.jpg
 

ajw22

Gold Supporter
TFP Guide
Jul 21, 2013
28,469
Northern NJ
Pool Size
35000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-60
Welcome to TFP.

The light has a tab on the bottom and should pull out from the top after the screw is removed.

You never know if someone used silicone around the rim or something else that is sticking to it.
 
Thread Status
Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.