TriStar VSP has lost connection to Omnilogic after the breaker was turned off

Eikonal

New member
Jul 1, 2016
4
Katy, Texas
I searched the forums but couldn't find this posted. My system has been working for several years and then all of a sudden I lost communication between one of my pumps (Waterfall) and the omnilogic. I tried to reset the communication in the config but the HUA was not being recognized. I have power and I checked the wires with a multimeter and all looks okay. I tried to turn off the breaker for the pump to reset it and I accidentally turned off the wrong pump (Filter).

I powered up the (Filter) pump and now I have lost communication between this pump and the omnilogic. I suspect I have the same problem with both pumps.

How do I re-establish a connection between the pumps and the omnilogic.

All firmware was up to date as well.
 

Eikonal

New member
Jul 1, 2016
4
Katy, Texas
Okay. I powered everything off including the main circuit board for the omnilogic and powered it all back on. The HUA's were back so I reconnected each pump and it is all working now.