SWG bubbles?

[Frank in FL]

Are these what the Hydrogen bubbles look like from a SWG? Zoom in on pic to see then.

I’ve noticed that when rpms are at 1000ish and I bump it up to 2400-3450 my first return closest to pool spits out these bubbles for about 10 seconds or so. When I go from a high rpm to a low rpm, the bubbles appear again.

 

[Adipal]

I can’t answer that, but I do get them when the pump speed changes.

 

[ajw22]

What SWG do you have? What % is it set to? Do you bubbles come and go on a regular cycle?

 

[jblizzle]

That is what mine look like. Likely the hydrogen bubbles. Apparently you can put a lighter above them and they will pop to confirm.

 

[Frank in FL]

It was set at 100% for 24 hours per the pool builder. Now it’s reduced to 70%

What SWG do you have? What % is it set to? Do you bubbles come and go on a regular cycle?

 

[Frank in FL]

Oh yea? Hold my beer. BRB LOL ??

That is what mine look like. Likely the hydrogen bubbles. Apparently you can put a lighter above them and they will pop to confirm.

 

[jblizzle]

My swg controller just went belly up in the on configuration when with pump off. Noticed huge bubbles glugging out of the returns, later thought that could have an interesting "pop"

 

[ajw22]

I don't know what the cycle time is for the Trueclear. If you watch the bubbles you should see them disappear 30% of the time if they are coming from the SWG.