ScreenLogic Mobile Notifications

esh1982

New member
Jan 30, 2021
4
Bay Area, CA
New to TFP (first post!) and new to pools but have a strong background in industrial/commercial automation. Does the ScreenLogic mobile app support notifications? I have an EasyTouch 8 control panel system that was installed about 6 months ago.
 

esh1982

New member
Jan 30, 2021
4
Bay Area, CA
Can the EasyTouch 8 control system be setup so that should it run in freeze protection mode when the OAT gets too low (I live in the SF Bay Area) it will then not run the regular pool scheduled that day? Would like to save on energy costs.
 

Jimrahbe

Mod Squad
TFP Expert
LifeTime Supporter
Jul 7, 2014
20,931
Bedford, TX
1982,

ScreenLogic has a spot to enter an e-mail address for "system alerts to be sent"..

That said, I can't think of anything that I would want to know.. :mrgreen:

You can't set up your own alerts, so all you would get are the ones that Pentair has preprogrammed.. The only one I have seen is the "Cold water cut off" for the SWCG.

That said, I have never tried to use the e-mail alerts.. so have no idea if they actually work.

See lower left on the following set up page..




Thanks,

Jim R.
 

mknauss

Mod Squad
TFP Expert
Bronze Supporter
May 3, 2014
36,407
Laughlin, NV
Pool Size
6000
Surface
Fiberglass
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
Can the EasyTouch 8 control system be setup so that should it run in freeze protection mode when the OAT gets too low (I live in the SF Bay Area) it will then not run the regular pool scheduled that day? Would like to save on energy costs.
No. The regularly scheduled functions will still occur.
 

esh1982

New member
Jan 30, 2021
4
Bay Area, CA
1982,

ScreenLogic has a spot to enter an e-mail address for "system alerts to be sent"..

That said, I can't think of anything that I would want to know.. :mrgreen:

You can't set up your own alerts, so all you would get are the ones that Pentair has preprogrammed.. The only one I have seen is the "Cold water cut off" for the SWCG.

That said, I have never tried to use the e-mail alerts.. so have no idea if they actually work.

See lower left on the following set up page..




Thanks,

Jim R.
Got it, thanks!
 
Thread Status
Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.