moved from here
I sent my board for repair 3 times to a guy in OK who swears it’s fixed and I still get this « check system cell power error » message. Seems like my cell is working at 100% non stop if it’s plugged into the board ( its set for 10% from 9-5). My chlorine is way too high.
I sent my board for repair 3 times to a guy in OK who swears it’s fixed and I still get this « check system cell power error » message. Seems like my cell is working at 100% non stop if it’s plugged into the board ( its set for 10% from 9-5). My chlorine is way too high.
Last edited by a moderator: