Salt calibration not counting down

[simonoaks]

Hi,

I just installed a new T9 Calimar cell. it i working fine, good voltage , amps et. However, the calibration will not count down. I did salt test ( using proper testing not strips ) and salt is at 3500. However, the Aqua Rite says 4800. Tried to do the calibration, but it is not counting down , it just stays at -5000. Any ideas ? thx

 

[ajw22]

Try and set the cell type to T-15.

 

[simonoaks]

Try and set the cell type to T-15.

That worked thanks ! It is at 3300 , instead of the correct 3500, but close enough , I guess. It would not count down from a higher number to enable me to capture 3500.

 

[ajw22]

3300 vs 3500 is pretty god for that type of cell.