Question about Pentair IC40

Jul 17, 2019
23
Ontario
I have a pool that is about 1 week old. Everything seems to be going well but I think my chlorine level is a little high. I’m at just over 3PPM. The IC40 is set at 60%. I want to reduce to 40% but every time I hold the minus button, it flashes and goes to 40%. About 15 seconds later is flips back to 60%. What am I doing wrong? It does seem to like any setting aside from 60%
 
I have read that article. Very good and informative. What I’m not understanding is why my adjustments on the SWG are not saving? I have the SWG wired into the easy touch panel. As far as I can tell, the only way to control the SWG output is directly on the SWG itself.
 

Enjoying this content?

Support TFP with a donation.

Give Support
I'm wondering if the pool is only a week old why you got an intellichlor. Isn't the ichlor the newer one?

Newer is not necessarily better. ;)

iChlor only has 15K and 30K cells. IntelliChlor has 40K and 60K cells.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.