I went out today to empty out my baskets and noticed my main pump was only about 1/4 of the way full with water and I had no pressure in my filters.
I immediately turned everything off and called my PB (still under warranty) They are sending a Jandy tech to look over everything. What could be the issue?
- both skimmer baskets were clean
- could the pipe between pool and pump be clogged?
- Leak? (doubtful as there is no puddled water seaping up from ground)
When I ran in spa mode all valves functioned properly but main pump seemed to only fill halfway with water.
I immediately turned everything off and called my PB (still under warranty) They are sending a Jandy tech to look over everything. What could be the issue?
- both skimmer baskets were clean
- could the pipe between pool and pump be clogged?
- Leak? (doubtful as there is no puddled water seaping up from ground)
When I ran in spa mode all valves functioned properly but main pump seemed to only fill halfway with water.