Pyrex triton minimax heater problem

4x4tx

Well-known member
Jul 23, 2007
161
I've been researching this and thought it could be either of these things but now not sure...1 pressure switch bad and 2 power board bad...but I don't have any led lights including power green or lit...I have a Jandy aqua link system but haven't opened up the box yet..thinking now maybe relay or connection is bad to the heater? Anyone have any ideas?


Sent from my iPhone using Tapatalk
 

4x4tx

Well-known member
Jul 23, 2007
161
I just replaced transformer so now getting the green power light but no other lights? Any ideas?


Sent from my iPad using Tapatalk
 

4x4tx

Well-known member
Jul 23, 2007
161


Is one of the "trays" just gone a victim of rust ? There is a bar/tray running across the bottom on the back side but only a pile of rust on the front..is that one that collapsed? And is that needed?


Sent from my iPhone using Tapatalk
 

4x4tx

Well-known member
Jul 23, 2007
161
I'm getting a tstat light along with power light...does that mean I need to replace the tstat?


Sent from my iPhone using Tapatalk