Pool Math CSI Logs

Aug 15, 2021
5
Houston, TX
Pool Size
35000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
CircuPool RJ-45
Does anyone know how to get the CSI to log so I can track it? When I enter new logs it is not an option. I have to open the CSI "tab" and enter some additional data to see what the value is, but it never gives me an option to log it. I have selected to track CSI in the settings, but not borates or water temperature. Must I track these as well to allow logging of CSI? I don't use borates.
 

Msch99

Gold Supporter
Bronze Supporter
Jun 11, 2018
1,015
Verona, MO
I think temp has an effect. Try tracking and entering a temp maybe? Can turn back off if need.
 

Bperry

Gold Supporter
Aug 20, 2020
1,000
Knoxville, TN
Pool Size
27000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
CircuPool RJ-60
Does anyone know how to get the CSI to log so I can track it? When I enter new logs it is not an option. I have to open the CSI "tab" and enter some additional data to see what the value is, but it never gives me an option to log it. I have selected to track CSI in the settings, but not borates or water temperature. Must I track these as well to allow logging of CSI? I don't use borates.

you don’t log CSI value manually, but if you check the “track CSI” option it’ll calculate it for you and include the result in your logic
 

gingrbredman

Gold Supporter
Jun 10, 2020
390
Chicagoland
Pool Size
11200
Surface
Fiberglass
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
Water temperature is one of the variables for the CSI calculation in Pool Math so make sure you also click the "Track water temperature" in the settings. Once I did that, the CSI number gets calculated for me in the app.
 
Thread Status
Hello , This is an inactive thread. Any new postings here are unlikely to be seen or responded to by other members. You will get much more visibility by Starting A New Thread