How do I know what my SWG Output and SWG % is? I would appreciate any help. And hope everyone is having a GREAT 4th.
pool math app SWG Output and SWG Cell %
- Thread starter Tjandjess
- Start date
- Jul 21, 2013
- 52,219
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I don't see details about the model or cell type of your SWG in your signature to answer your question
I am so sorry. I thought I had put it in my profile.
Hayward goldline prologic PL-P-4
Hayward TurboCell T-cell-9
Hayward goldline prologic PL-P-4
Hayward TurboCell T-cell-9
- May 3, 2014
- 58,284
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
In Poolmath, select the Hayward T9. It can produce 0.98 lbs of chlorine gas per day.
- May 3, 2014
- 58,284
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
- May 3, 2014
- 58,284
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
That is the % generating you have set.
With your SWCG, at that setting, with pump running 24 hours, you are adding 2.1 ppm FC to the pool water each day.
With your SWCG, at that setting, with pump running 24 hours, you are adding 2.1 ppm FC to the pool water each day.
Is it recommended that I run my pool 24hrs a day? Or can I adjust the % generating and run less right now I run my pool 12 hrs a day
- May 3, 2014
- 58,284
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
You need to run the pump long enough to generate the chlorine your pool needs. After that, the pump run time is up to your needs to skim the pool surface or other needs.
What FC does your pool consume each day? If you are unsure, use 3 ppm for now. So at 100% generating, the pump must run for 12 hours to generate 2.9 ppm per day. Start there. Test FC each day at the same time of day and if the FC drops, increase your pump run time. If it increases by too much, decrease your % generating or pump run time.
What FC does your pool consume each day? If you are unsure, use 3 ppm for now. So at 100% generating, the pump must run for 12 hours to generate 2.9 ppm per day. Start there. Test FC each day at the same time of day and if the FC drops, increase your pump run time. If it increases by too much, decrease your % generating or pump run time.
Thanks so much! I really appreciate to taking the time to explain this to me. I hope you have an absolutely great 4th.
Similar threads
