I just started using the pool math app and it calls for FC of 1-3. I downloaded a lot of docs from the pool school and in the "Water balance for SWG's" it says the target FC level is 4-6. When I open the app it say recommended FC 1-3. Do I just ignore this and change target to 4, 5 or 6? Dumb question I know.
Pool math and SWG FC levels
- Thread starter jeffj247
- Start date
- May 3, 2014
- 58,366
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
Be sure your pool is setup -- select the Gear icon in the upper right.
Also you need to enter all your test results to get proper chemical additions, including CYA, TA, etc.
I suggest you read ABC's of Pool Water Chemistry and consider reviewing the entire Pool School eBook.
Be sure your pool is setup -- select the Gear icon in the upper right.
Also you need to enter all your test results to get proper chemical additions, including CYA, TA, etc.
I suggest you read ABC's of Pool Water Chemistry and consider reviewing the entire Pool School eBook.
Minimums and targets are a function of your CYA level. I think the app includes the minimum in the specified range, but other charts split them out.