Chrisoo27

New member
May 17, 2020
1
Holtsville, New York
Hi All,

i recently purchased a used Polaris P825robot off of Let-Go for a steal. After I got home, threw it in the pool and plugged it in and all was fine. Ran a cycle for about 1 1/2 hours.

second time I went to use it, the SCS error indicator blinked once... and from Polaris that means anything from a cord thats loose to a major issue.

I’ve done everything thats obvious; verified power at the outlet, not using an extension cord, filter basket is clean, propeller is clear, cable is clicked into the SCS.... inly thjng left is either the SCS itself (please god no) or a loose connection of the cable on the robot side which i dont know how to get to to verify.

does anyone else have suggestions or similar issues with this?
Much appreciated for any help.

Thank you guys in advanced.
 

ajw22

Gold Supporter
TFP Guide
Jul 21, 2013
23,587
Northern NJ
Pool Size
35000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-60
Welcome to TFP.

If you figure out any tricks to get it running let us know.
 
Thread Status
Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.