Any help would be appreciated. Pentair Ultratemp about 4 years old. The control panel lights up and display is normal, no error codes. But, the unit will not start when the on/off switch is depressed, and the on light is not illuminated.
Pentair Ultratemp will not turn on.
- Thread starter numbbers
- Start date
- Jul 21, 2013
- 21,205
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Do you have any pool automation?
Is your pump running?
The HP will not turn on if it does not see water flow from the pressure switch. The pressure switch could have failed.
See page 29 in https://www.pentair.com/content/dam...ump-installation-and-users-guide-en-fr-sp.pdf
Is your pump running?
The HP will not turn on if it does not see water flow from the pressure switch. The pressure switch could have failed.
See page 29 in https://www.pentair.com/content/dam...ump-installation-and-users-guide-en-fr-sp.pdf
Similar threads
