Hi everyone, I'm having an issue with one of our Pentair microbrite pool lights. When I go to change the colors, this particular light flashes on and off as the relay resets, and will not accept a new program. Does this sound like a bad relay or a bad light?
Pentair LED light issue
- Thread starter cybertoad
- Start date
- Jul 21, 2013
- 52,475
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
How many MicroBrites do you have?
Are they all connected to one relay?
The relay just toggles power on and off and the light should change color. I don’t understand about accepting a new program.
Are they all connected to one relay?
The relay just toggles power on and off and the light should change color. I don’t understand about accepting a new program.
This light flashes on-off-on-off-on-off during the relay "toggling" process (supposed to remain dark), and will not change to a different color selection. Just checked and it is on the same relay as the other 3 lights that are working properly, so it has to be the electronics in the light itself. It is still under warranty with Pentair so I submitted a service request.