Pentair EasyTouch Controller

wbrewski

Bronze Supporter
Apr 10, 2016
62
Santa Ana
#1
Guys, Be careful when getting a Pentair Easytouch Controle , I got burned When I was having my pool re-done I ordered a EasyTouch PL4/PSL4. I took this for a pool and spa setup.
Now the problem, trying to set it up I get the heater and pool pump to work but when I go the spa mode the inlet and discharge valves do not shift, I called pentair service and they told me that I have the wrong mother bd in the control.

I am asking if this sounds right, or did I get a service person that does not know there stuff?:confused:
 

Jimrahbe

Mod Squad
TFP Expert
LifeTime Supporter
Jul 7, 2014
10,530
Bedford, TX
#2
Walt,

You say you ordered an EasyTouch "PL4/PSL4"... but that is impossible since these are two different units with two different Part Numbers..

The PL4.. Is a "P" or Pool only unit... The PSL4... is a "PS" and is for those people that have a Pool and a Spa..

It looks to me like you ordered a PL4..

I suggest you double check what you ordered, as they may have shipped you the wrong unit.

Sorry,

Jim R.
 

Jimrahbe

Mod Squad
TFP Expert
LifeTime Supporter
Jul 7, 2014
10,530
Bedford, TX
#4
the book that came with it says, Easytouch PL$/PSL control system for pool and spa.
Walt,

Just because they use the same manual to cover both products, does not mean that they are not two separate units...

My manual covers both EasyTouch as well as the IntelliTouch, two very different units.

Jim R.
 

wbrewski

Bronze Supporter
Apr 10, 2016
62
Santa Ana
#6
I bit the dust and ordered the circuit board Pentair told me it needed. Will sell the other to anyone who needs it # 522456 no reasonable offer refused.
send private email to me.