Pentair Easy Touch

EskimoPie

LifeTime Supporter
Jul 27, 2007
278
Sahuarita, AZ
I vaguely remember seeing a thread on this a long time ago (you might try to search)... If I recall correctly, the digital communications between the EasyTouch and the Pool Pilot are not compatible. At the very least you'd have the pool pilot wired off the easytouch relay which powers your pump. This would cause the SWCG to run whenever your pump runs, but you'll probably have to set levels manually on the pool pilot itself. We have a few SWCG experts on the forum and I'm betting one of them will chime in with a more definitive answer soon.
 

JasonLion

TFP Expert
Platinum Supporter
LifeTime Supporter
May 7, 2007
37,879
Silver Spring, MD
I believe they can be wired up if you can find the correct cable. However you lose temperature compensation so it may be better to simply switch to AutoPilot on and off with the pump.