Yes we do have gas in the tank. The heater did ignite and stayed lit during the short time we had it on. We are going to be testing it to make sure it runs as it should.
Pentair 250 heater problems
- Thread starter Jvrpants
- Start date
Yes we do have gas in the tank. The heater did ignite and stayed lit during the short time we had it on. We are going to be testing it to make sure it runs as it should.
Alright so the heater seems to be running pretty well but our membrane pad is not functioning. We are thinking it got burned out. We are jumping the pins on the circuit board with a wire and they are functioning normally.
Last edited:
- Jul 21, 2013
- 52,449
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 52,449
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
About $50... not clear from the Amazon reviews there is any functional difference. You can buy 3 aftermarket ones for one genuine Pentair keypad. It may be worth a try.