Older Hayward H400 Pool Heater - need help findind blower motor

merzcm

New member
Sep 12, 2015
2
Richardson tx
Hi all,

I have about 15 year old Hayward H400ID1 with a defective blower motor assembly. I checked with Hayward and the part number I need is IHXBWR1930 which is list as NLA. That is for the entire assembly

The motor itself is a Magnetek 208-240V 0.6A part# JE1F030NS and If I could find a substitute for that, I could probably replace the motor and reuse the housing. I can't find that motor listed anywhere.

Anyone have any ideas?

Thanks!
 

ps0303

TFP Expert
In The Industry
Jul 6, 2011
4,049
FL

merzcm

New member
Sep 12, 2015
2
Richardson tx
Thanks for the reply. I had someone come out and look at it - when they bypassed the motor it worked fine. I had replaced the control board a few years ago and it worked intermittently. I will never again use the pool company recommended by American Home Shield. They spent 6 or 8 hours trying to make it work and never once suggested it might be a blower motor problem.

The other company diagnosed it in under an hour, but can't get the part.