Ok got the SWG figured out, i hit the filter button manually and the swg switched on. So now it is actually running as opposed to what I thought was running. This should stop the losing battle with my FC now.
New saltwater pool
- Thread starter johnm160
- Start date
- May 3, 2014
- 58,311
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
If you have an automation system, it should require the filter/pump schedule to be running for the SWCG to be on.
Thanks, I did not connect the pump to the automation yet, I just wanted to get the pump running since the water was sitting several days as I worked out liner position issues on the steps. Manually pressing the filter button worked. After the excavation guy does the backfill, grading and paver base tomorrow it will free up time for me to finish getting it connected to the aquarite.
FC 9.
I think I got the system working. Just shut the pump down for the first time since I started it initially. Will see what it is in the morning.
I think I got the system working. Just shut the pump down for the first time since I started it initially. Will see what it is in the morning.
Similar threads
