New Hayward sp2607X10 pump 115v vs 220V

norbie

Well-known member
Aug 21, 2007
46
Massachusetts
I just purchased a new Hayward sp2607X10 1 HP pump. It said it came preconfigured as 230V service. I want to reconfigure it to 115V however when I opened up the pump the white arrow on the black connector block (which has the black wire on one side and the white wire with a black line down it on the other side.) was lined up with the 115V arrow. How can I verify I have the connector in the right location for 115V service?

Thank you in advance.
 

Isaac-1

TFP Expert
LifeTime Supporter
May 10, 2010
6,711
SW Louisiana
I would also say post a photo, hayward (or AO Smith who makes the motors for Hayward) has a habit of changing the way the voltage selector looks every few years, I know every time I have replaced my pump or motor the new one was slightly different than the old one anyway.
 

norbie

Well-known member
Aug 21, 2007
46
Massachusetts
Also, if someone could take a peek @ this photo it would be great is there any special break in process to follow on a new pump?

Thank you :?:
 

JasonLion

TFP Expert
Platinum Supporter
LifeTime Supporter
May 7, 2007
37,880
Silver Spring, MD
There isn't any special break in procedure, just start using the pump.

That certainly looks like it is setup correctly for 110 volts.