Need help Identify Seal/Oring

gmike09

Bronze Supporter
Aug 10, 2016
62
Atlanta, Ga
Today my pull pump cut off in the middle of the day. I noticed some weird rubber type stuff inside of the impeller. Apparently there is some sort of o ring or seal inside of the impeller but I can't identify the part. Circled in red is the seal or oring that appears to have broken with half in place and the other half chewed up. I have a jacuzzi magnum pump. Anybody have any ideas what this could be?
 

Attachments

  • 0814211347_HDR~3.jpg
    0814211347_HDR~3.jpg
    343.3 KB · Views: 8

cowboycasey

Gold Supporter
LifeTime Supporter
TFP Guide
Jul 3, 2013
8,648
Southern OK
Pool Size
15000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
CircuPool SJ-40
You will need a rebuild kit to replace that seal.. while you are it get a salt or SCS seal whit the rebuild kit as they are a better seat :)

 

Attachments

  • Use-The-Right-Seal-For-Your-Pool-and-Spa-Pumps.pdf
    311.1 KB · Views: 0
Thread Status
Hello , This is an inactive thread. Any new postings here are unlikely to be seen or responded to by other members. You will get much more visibility by Starting A New Thread