My Stenner won't Stenner

gwegan

TFP Expert
Apr 19, 2013
2,769
Sacramento, CA
My Stenner pump will not move anything.

I've replaced the tube and it operates but when I test it with a bowl of water nothing happens. I'm not sure you could prime it but its self priming.

Any ideas?
 

mas985

TFP Expert
LifeTime Supporter
May 3, 2007
14,050
Pleasanton, CA
Pool Size
20000
Surface
Plaster
Chlorine
Salt Water Generator
Then the heads may need.to be adjusted or the wrong tubing is used. If it doesn't fully squeeze the tube closed, it won't pump.
 

Bama Rambler

Mod Squad
TFP Expert
Bronze Supporter
LifeTime Supporter
Jun 22, 2009
24,201
SouthWest Alabama
What model pump do you have?

How old is the pump? If it's a few years old the roller tension springs could have lost tension and the rollers aren't squeezing the tube enough.

Does it have the collapsible rollers? If so make sure they're not locked retracted.
 
Thread Status
Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.