Multi port valve stuck

newyorkpoolguy

New member
Jun 6, 2021
1
suffolk county ny
Moved from here.
I backwashed my pool. Pentair filter. Then I turned the valve counter clockwise and now the handle is stuck on "closed". Is there a way to free it up to swing it back to filter?? Won't push down to raise it out of the notch. Thanks!!
 
Last edited by a moderator:

Texas Splash

Mod Squad
TFP Expert
LifeTime Supporter
Jun 22, 2014
33,136
Texas, San Antonio/Marion, South-Central Area
Pool Size
17888
Surface
Fiberglass
Chlorine
Salt Water Generator
SWG Type
CircuPool RJ-45 Plus
Welcome to TFP! :wave: You might have to remove the top part of the valve to see if the spring, valve stem, etc are still in good shape and that something didn't break. If after removing you find nothing obvious and then it works fine, you might want to try turning the handle the same direction each time (clockwise for example). Maybe something got pinched.
 
Thread Status
Hello , There was no answer in this thread for more than 60 days.
It can take a long time to get an up-to-date response or contact with relevant users.