Jet Identification / Removal

sdruss

New member
Sep 27, 2021
2
San Diego, CA
Hi I have a concrete in-ground pool/spa. Recently some debris broke off from our filter manifold and got into, and is partially blocking, two of the spa jets. The issue I am having is that I have no idea how to remove the spa jets to let the debris pass. If possible I'd like some help in identifying or understanding how I can service the jets to get the debris out, or if there is another way. The jets seem to be Venturi style jets that sit recessed about 5" in a 1" PVC pipe. Any help is greatly appreciated.
 

Attachments

  • IMG_7643.jpg
    IMG_7643.jpg
    262.9 KB · Views: 7
  • IMG_7648.jpg
    IMG_7648.jpg
    802.5 KB · Views: 7

ajw22

Gold Supporter
TFP Guide
Jul 21, 2013
29,783
Northern NJ
Pool Size
35000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-60
You may have a setup like this where the jet is not removable...

1629077876046-png.364861


Let's see if @RDspaguy has ideas.
 
Thread Status
Hello , This is an inactive thread. Any new postings here are unlikely to be seen or responded to by other members. You will get much more visibility by Starting A New Thread