Jandy truclear swg screen

[Scottytoohottie]

Hi, my tuclear display switches from waiting, to chlorination, then it turns off, sometimes it turns back on with blank screen, or standby, or back to chlornating. Every 1-5 min. This is all happening in auto mode. If in service mode, does same thing . Never has alarms or anything. All chemistry is good. Had new pump put in few months ago, but that shouldn't matter, take wires off, new wires on. The aqualink program is there. Could it be bad cell or something Thanks

 

[ajw22]

You are seeing the cell turn on and off based on the % generation set. It runs for the set number if minutes and then rests until the next generation cycle.

 

[Scottytoohottie]

I understand what that is, bit this is different, never happened before. Even in boost mode or if i run it at 70, it will just turn off or shut down. Weird.

 

[ajw22]

Call Jandy support.