I have a three year old Aquapure that I take in every winter and this year after I hooked it up and turned it on, it started cycling with a no flow alarm, and then no output. It appears to be cycling as I can hear the fan shut off and on. ANy ideas?
Jandy Aquapure Ei trouble on startup
- Thread starter LonnieBerry23
- Start date
Merged threads. TFP Mod
I wanted to take a moment to tell you about myself. I have had a salt pool for 5 years and not without it's challenges. Three years ago I updated my salt generator and today was the first day it gave me trouble. (Aquapure Ei Jandy) I posted that it was cycling no flow, no output and back on with the fan shutting down and turning on as well. I was hoping I wasn't the only person that had this problem.
I wanted to take a moment to tell you about myself. I have had a salt pool for 5 years and not without it's challenges. Three years ago I updated my salt generator and today was the first day it gave me trouble. (Aquapure Ei Jandy) I posted that it was cycling no flow, no output and back on with the fan shutting down and turning on as well. I was hoping I wasn't the only person that had this problem.
Last edited by a moderator:
Hi there Lonnie, welcome to TFP 
Tell ya what- I'm gonna move your issue to the SWG forum and we'll see if anyone there has suggestions. I hope so!
Maddie
Tell ya what- I'm gonna move your issue to the SWG forum and we'll see if anyone there has suggestions. I hope so!
Maddie