I have a Intex Purespa . I would like to know which is the outtake sensor and which is the intake sensor.. Looking at back of power unit which is which? Are both the sensors the same and where can I purchase them besides through Intex?
Intex Puespa
- Thread starter Joestan55
- Start date
- Jul 21, 2013
- 52,480
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
This thread may be helpful...
www.troublefreepool.com
@jseyfert3 ideas?
Intex Pure Spa E95 Code, I need help!!
I have an Intex Pure Spa that throws a e95 code, meaning the water is too hot! But it will throw this code if the water is 55 F! So the water is not too hot! The heater works when the code isn't on. I thought maybe the controller was bad so I tried a buddy's controller and it did the same thing...
www.troublefreepool.com
@jseyfert3 ideas?
Unfortunately not. It appears we got lucky as we never got one of the dreaded error codes during the time we used ours, so I never opened up my base.
To the OP: can you not trace the sensors by following the path of the water?
To the OP: can you not trace the sensors by following the path of the water?
Similar threads
