Intelitouch power shutoff question

dykes26

Well-known member
Aug 17, 2009
184
I am ready to clean my IC40 and the directions say to turn off the power at the main switch before removing. Can In use the breakers built into the intelitouch or should I go straight to the main breakers?
 

gm129387

New member
Jun 4, 2010
4
Just unplug it from the main controller (it unscrews from the bottom). You will need to do that any way to remove the cell for proper cleaning.
 

bk406

Well-known member
Dec 3, 2009
2,690
Central Massachusetts
gm129387 said:
Just unplug it from the main controller (it unscrews from the bottom). You will need to do that any way to remove the cell for proper cleaning.
No! Turn off the power at the Easytouch first. Do not pull the plug before you turn off the power. You can blow the board in the cell. Just shut off the breakers in the Easytouch.
 

Other Threads of Interest