Installing a 12 x 24 Intex rectangle above ground pool

swashbuckler3655

New member
May 26, 2020
1
Clearfield, Utah
I created a 16 x 28 area for my above ground pool, before I bring in the sand I want to set my 4" pavers down. Does anyone know the spacing of the brackets of the pool?
I thought I read 44" spacing on length and 40" spacing on width on center. Not sure if I read this correctly. Looks like 6 brackets on length side and 3 brackets on width side.
 

Attachments

ajw22

Gold Supporter
TFP Guide
Jul 21, 2013
18,959
Northern NJ
Welcome to TFP.

Intex recommends using pressure treated boards instead of pavers to support the legs on their rectangular pools. The support for the legs needs to be large enough so the legs do not hang off the sides of the support, and so the legs have room to spread out as the pool is filled.