Identify Pump and Skimmer

BkdGrain

Bronze Supporter
Apr 30, 2021
34
DFW, Texas
Surface
Plaster
Chlorine
Liquid Chlorine
Hello,

I am a new pool owner and in process of replacing broken parts of my pool.

Can anybody identify this skimmer?, the skimmer basket and cap seem to be wrong, the cap is loose and basket has gap and doesn't seem to fit snug or deep enough.

Skimmer Sizes:
1: 9''
2: 8 3/8
3: 8 3/4 with notches wide
4: 8''
5: 9'' deep

skimmer.jpg


What model of pump is this?, the label on motor says "Century Centurion 1.5HP 230v 8AMP, Part 0-F56SS40A01-24", I assume motor and pump can be from different companies or individual parts were replaced at some point. It looks based on pictures a Pentair Challenger High Flow Pump, but I can't find any "Polaris" label on this.

pump.jpg
 

Newdude

Gold Supporter
TFP Guide
Jun 16, 2019
11,186
NY
Google the top # above the serial # on the pump sticker in the pic. It’s probably the manufacturer code for the model. Maybe you’ll get lucky. Also, sta-rite pumps look like that too.
 

ajw22

Gold Supporter
TFP Guide
Jul 21, 2013
29,067
Northern NJ
Pool Size
35000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-60
Yeah, that looks like a Pentair Challenger pump. Probably not with the original motror.


Post pics of the front and back of the skimmer lid.
 

BkdGrain

Bronze Supporter
Apr 30, 2021
34
DFW, Texas
Surface
Plaster
Chlorine
Liquid Chlorine
Yeah, that looks like a Pentair Challenger pump. Probably not with the original motror.


Post pics of the front and back of the skimmer lid.

The current skimmer lids (2) are wrong size - somebody replaced them at some point, one is undersized and wiggles around, the other is missing the inner plastic piece (not sure what it's called) which it needs to sit on.

skim1_top.jpgskim1_down.jpgskim2_down.jpg
 

BkdGrain

Bronze Supporter
Apr 30, 2021
34
DFW, Texas
Surface
Plaster
Chlorine
Liquid Chlorine
Google the top # above the serial # on the pump sticker in the pic. It’s probably the manufacturer code for the model. Maybe you’ll get lucky. Also, sta-rite pumps look like that too.

I thought the motor and pump are different parts, I only see sticker on the motor, nothing on the circular pump part or on the strainer (the one with filter bucket).
 

ajw22

Gold Supporter
TFP Guide
Jul 21, 2013
29,067
Northern NJ
Pool Size
35000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-60
What are the words/letters/numbers in this area or other areas?

Does either lid fit if you swap them?

It looks like the edge of the skimmer was destroyed when the deck was replaced.

572AF90E-EED3-4426-8932-52ACC76340C2.jpeg
 
Thread Status
Hello , This is an inactive thread. Any new postings here are unlikely to be seen or responded to by other members. You will get much more visibility by Starting A New Thread